江苏大学门户 CHINESE
 
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
 
  Faculty & Staff
Part-time Professors
Supervisors
Ph.D Supervisors
MS Supervisors
Faculty & Staff
Talent Recruitment
Search
 
Faculty & Staff >> Supervisors >> MS Supervisors >> Institute of Structural Health Management
MS Supervisors
 
Jian Li
NameJian LiDate of Birth09, 1989

Title LecturerDegreePh.D.
Position DisciplineMechanics

Education and
Professional
Experience


Education:
09, 2012 – 12, 2018 Nanjing Tech University
PhD and Chemical Process Equipment
Fatigue crack Growth Behavior of Commercial Pure Titanium
09, 2008 – 06, 2012 Nanjing Tech University
Bachelor and Process Equipment and Control Engineering
Professional Experience
03, 2019 – Present Jiangsu University, Lecture
Researcher of Institute of Structural Health Monitoring

Social Academic
Post and Honor


International journal reviewer of Applied Energy, International Journal of Mechanical Sciences, Engineering Fracture Mechanics, International Journal of Pressure Vessels and Piping

Scientific
Research Field


1. Structural integrity assessment
2. Fatigue and fracture of metallic materials
3. Optical experimental mechanics

Main Papers

1. Jian Li, Chuan-Yi Su, Lei Lu, Peng Zhang, Le Chang, Xin-Ting Miao, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou. Investigation on fatigue crack growth behavior for commercial pure titanium at different crack tip plastic deformed levels. Theoretical and Applied Fracture Mechanics 2019; 100: 1-13.
2. Jian Li, Peng Zhang, Lei Lu, Fei Lv, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou. Effect of pre-strain on fatigue crack growth behavior for commercial pure titanium at ambient temperature. International Journal of Fatigue 2018; 117: 27-38.
3. Jian Li, Lei Lu, Peng Zhang, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Yuan-Zhe Wang, Xiao-Hua He, Chang-Yu Zhou. Effect of cold creep on fatigue crack growth behavior for commercial pure titanium. Theoretical and Applied Fracture Mechanics 2018; 97: 177-188.
4. Jian Li, Chang-Yu Zhou, Le Chang, Xin-Ting Miao, Xiao-Hua He. Limit loads for un-cracked and circumferential through-wall cracked pipe bends under torsion moment considering geometric nonlinearity. Thin-Walled Structures 2017; 116: 37-52.
5. Jian Li, Chang-Yu Zhou, Xin-Ting Miao, Le Chang, Xiao-Hua He. Plastic limit loads for pipe bends with circumferential through-wall crack under torsion moment. International Journal of Mechanical Sciences 2015; 100: 283-297.
6. Jian Li, Chang-Yu Zhou, Peng Cui, Xiao-Hua He. Plastic limit loads for pipe bends under combined bending and torsion moment. International Journal of Mechanical Sciences 2015; 92: 133-145.
7. Jian Li, Chang-Yu Zhou, Ji-Lin Xue, Xiao-Hua He. Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis. International Journal of Mechanical Sciences 2014; 88: 100-109.
8. Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou. Comparisons of low cycle fatigue behavior of CP-Ti under stress and strain-controlled modes in transverse direction. Materials Science and Engineering A 2019, 746: 27-40.
9. Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou. The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction. Materials Science and Engineering A 2019, 742: 211-223.
10. Le Chang, Chang-Yu Zhou, Hong-Xi Liu, Jian Li, Xiao-Hua He. Orientation and strain rate dependent tensile behavior of single crystal titanium nanowires by molecular dynamics simulation. Journal of Materials Science & Technology 2018; 34(5): 864-877.
11. Xin-Ting Miao, Qin Yu, Chang-Yu Zhou, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of I-II mixed mode crack for commercially pure Titanium. Theoretical and Applied Fracture Mechanics 2018; 96: 202-215.
12. Xin-Ting Miao, Qin Yu, Chang-Yu Zhou, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading. European Journal of Mechanics/A Solids 2018; 72: 235-244.
13. Shun-Jie Li, Chang-Yu Zhou, Jian Li, Xiang-Ming Pan, Xiao-Hua He. Effect of bend angle on plastic limit loads of pipe bends under different load conditions. International Journal of Mechanical Sciences 2017; 131-132: 572-585.

Main Academic
Activities


1. The Chinese Congress of Theoretical and Applied Mechanics-CCTAM 2019, Aug 25-28, 2019, Hangzhou, China. (Oral presentation)
2. 2018 International Symposium on Structural Integrity-ISSI2018, Nov 2-5, 2018, Nanjing, China. (Oral presentation)
3. Engineering Structural Integrity Assessment-ESIA14, in conjunction with the 2017 International Symposium on Structural Integrity-ISSI2017, May 16-19, 2017, Manchester, UK. (Oral presentation)
4. The 2016 ASME Pressure Vessels and Piping Conference, July 17-21, 2016, Vancouver, BC, Canada. (Oral presentation)
5. The 14th International Conference on Pressure Vessel and Technology, September 23-26, 2015, Shanghai, China. (Oral presentation)

Email

Tel: (+86) 15195906305
Email: lj66@ujs.edu.cn; lijian83675215@163.com
Address: 301, Xuefu Road, Jingkou District, Zhenjiang, Jiangsu Province, P. R. China

.

 
About us
About us
Leadership
Organization
Alumni
Faculty & Staff
Part-time Professors
Supervisors
Faculty & Staff
Talent Recruitment
Academics
Departments
Undergraduate Education
Graduate Education
Overseas Education
Post-doctoral Station
Research
Scientific Research Platform
Experiement Center
Projects
Publications
Patents
International
Academic Exchanges
Student Exchanges
Scholarship
International Office of JU
OEC of JU
Student Life
Associations
Activities
Facilities
Tourism
Maps & Transportation
Download
Teaching Affairs
Postgraduate Education
Copyright ? 2018 Faculty of Civil Engineering and Mechanics.All Rights Rsesrved