| 主要论著 | 2025年 1) Wenlong Li, Shiyu Wu, Jianguo Zhu, Wanbin Guan, Enze Jin, Hongrui Liu. Digital image correlation technique for full-field deformation of SOFC at 1300 °C: An efficient speckle pattern for porous and diffusible substrates. Optics and Laser in Engineering，2025, 186,108849. 2) Shiyu Wu, Wenlong Li, Lijun Zhuo, Jianguo Zhu, Guihua Xie, W. Zhang, P. Singhatanadgid, D Zhang. Thermodynamic Investigation of Glassy Polycarbonate Under Slow Torsion by Experimentally Characterizing Adiabatic Temperature Rise，Exp Mech, 2025， 2024年 1) Wenlong Li, Shiyu Wu, Jianguo Zhu, Weixu Zhang, Wanbin Guan, Jian Li. Real-time deformation and stress response of the planar SOFC during sintering. Journal of the European Ceramic Society, 2024, 44 (4): 2242-2250. 2) Chaoyi Li, Jianguo Zhu, Lijun Zhuo, Jian Li, Dongsheng Zhang. Continuous laser-line scanning thermography with data-processing algorithm for rapid and accurate defect inspection. NDT&E International, 2024, 142, 103028. 3) Zhuo, L., Xu, Y., Jianguo Zhu, et al. Quantitative Evaluation of Interfacial Defect Size and Pattern by Solving a 3D Inverse Problem Based on Step Heating Thermography. Exp Mech, 2024: 64: 245-259. 4) Lijun Zhuo, Changhu Liu，Jun Zhou, Jianguo Zhu, Chaoyi Li, Antonio Fernandez ´ Lopez. Thickness evaluation of organic coating using active long-pulse transmission thermography. Infrared Physics and Technology, 2024, 142, 105516. 5) Tariq Aziz, Wenlong Li, Jianguo Zhu, Beibei Chen. Developing multifunctional cellulose derivatives for environmental and biomedical applications: Insights into modification processes and advanced material properties, International Journal of Biological Macromolecules, 2024 (278) 134695 6) Tariq Aziz, Wenlong Li, Jianguo Zhu, Beibei Chen. Innovative cellulose-lactone hybrid material for efficient rhodamine 6G dye adsorption: Synthesis and characterization, International Journal of Biological Macromolecules, 2024 (282) 136847 7) Bo Liu, Qin Wei, Jianguo Zhu, Lijun Zhuo, Guangshan Song, Lusha Xiang, Mengchuan Hu. Barely visible impact damage detection in CFRP composite using vibrothermography with narrowband sweep excitation, Infrared Physics and Technology, 2024, 139, 105339. 8) 刘昌虎，周军，朱建国，卓立军. 涂层厚度检测的锁相红外方法研究, 实验力学（in press） 2023年 1) Qin Wei, Junke Huang, Jianguo Zhu, Lijun Zhuo, Chaoyi Li. Experimental investigation on detection of coating debonds in thermal barrier coatings using vibrothermography with a piezoceramic actuator. NDT and E International, 137 (2023) 102859. 2) Lijun Zhuo, Xin Yang, Jianguo Zhu, Zhen Huang, Jie Chao, Weihua Xie. Size determination of interior defects by reconstruction of subsurface virtual heat flux for step heating thermography. NDT and E International, 133 (2023) 102734. 3) Chaoyi Li，Lijun Zhuo，Jianguo Zhu. Detection of Debonding Defects in Thermal Barrier Coatings by Long Pulse and Vibro-Thermography. Lecture Notes in Mechanical Engineering, 144-159, 2024, Intelligent Systems in Production Engineering and Maintenance. 4) Mounir El Marzak, Hamza Karim Serroukh, Mouhcine Benaicha, Jianguo Zhu, Wenlong Li, Adil Hafidi Alaoui. Thermal analysis of rubber concrete under the effect of two heat treatments: shock temperature and standard fire. Journal of Thermal Analysis and Calorimetry (2023) 148:11535–11548 5) Hamza Karim Serroukh, Mounir El Marzak, Mouhcine Benaicha, Wenlong Li, Jianguo Zhu, Adil Hafidi Alaoui. Numerical analysis of the thermomechanical behavior of rubber concrete at high temperatures. Structural Concrete (2023) 24:3236–3250. 6) Hamza Karim Serroukh, Mounir El Marzak, Mouhcine Benaicha, Wenlong Li, Jianguo Zhu, Adil Hafidi Alaoui. Numerical development of a thermo-mechanical prediction model at high temperature: case of rubber concretes. Advances in Engineering Software (2023) 186, 103556. 7) Han Su, Jianguo Zhu. Multi-point measurement using DIC based on UAV platform. Proceedings of SPIE - The International Society for Optical Engineering, v 1255014, 2023, International Conference on Optical and Photonic Engineering, icOPEN 2022. 2022年 1) Zhen Huang, Jianguo Zhu, Lijun Zhuo, Chaoyi Li, Changhu Liu, Wenfeng Hao,Weihua Xie. Non-destructive evaluation of uneven coating thickness based on active long pulse thermography. NDT and E International, 130 (2022) 102672. 2) Jianguo Zhu，Zhuangzhuang Mao, Dongliang Wu, Jiangfan Zhou, Dacheng Jiao, Wenxiong Shi, Wenying Zhu, Zhanwei Liu. Progress and Trends in Non-destructive Testing for Thermal Barrier Coatings Based on Infrared Thermography: A Review. Journal of Nondestructive Evaluation, (2022) 41:49 3) S. Sivakumar, L. Kumaresan, D. Maria Sherin Bertilla, M.H. Vijay Dhanabal, G. Shanmugavelayutham, Jianguo Zhu. Synthesis of magnetic and superhydrophobic nickel nanoparticles by plasma arc discharge method, application for efficient recoverable and repeatable oil separation from oily water. Applied Physics A-Materials Science & Processing, 2022,128(1): 1-11 4) Qin Wei, Meng Han, Jianguo Zhu, Lijun Zhuo, Junke Huang, Wei Li, Weihua Xie. Experimental and numerical investigation on detection fatigue crack in metallic plate by vibro-thermography, Infrared Physics and Technology, 2022, 126 (2022) 104347 2021年 1) Wenjie Qian, Huiying Zhang, Jianguo Zhu, Jian Li, Jian Zhang, Muyu Zhang. Determination of fracture toughness of polymer coating using micro-scale digital image correlation technique, Polymer Testing, 2021,93, 106896. 2) Qi Zhu, Yuchun Zeng, Dong Yang, Jianguo Zhu, Lijun Zhuo, Jian Li and Weihua Xie. Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique, Coatings, 2021, 11, 245. 2020年 1) Sankaran Sivakumar, Subramaniam Yugeswaran, Kalimuthu Vijaya Sankar, Lakshmanan Kumaresan, Gurusamy Shanmugavelayutham, Yoed Tsur, Jianguo Zhu. Fabrication of nickel-yttria stabilized zirconia 3D micro-pattern by atmospheric plasma spray as a dual-functional electrocatalyst for overall water splitting applications in alkaline medium. Journal of Power Sources,2020,473. 2) Wei Q, Zhu L, Jianguo Zhu, et al. Characterization of impact fatigue damage in CFRP composites using nonlinear acoustic resonance method. Composite Structures, 2020:112804. 3) Qin Wei, Wenxin Wu, Wei He, Jianguo Zhu and Jian Zhang. 3D Finite Element Simulation of Shot Peening Using A Sequential Model with Multiple-Shot Impacts. International Journal of Computational Methods, 2020, 17(3):1850137 4) Wenjie Qian, Jian Li, Jianguo Zhu, Wenfeng Hao, Lei Chen. Distortion correction of a microscopy lens system for deformation measurements based on speckle pattern and grating, Optics and Laser in Engineering，2020, 124,105804. 5) Huiying Zhang, Xiang Li, Wenjie Qian, Jianguo Zhu, Beibei Chen, Jin Yang and Yu Xia. Characterization of Mechanical Properties of Epoxy/ Nanohybrid Composites by Nanoindentation, Nanotechnology Reviews，2020, 9:28-40 6) RanTao，Jianguo Zhu，Yuefei Zhang，Wei-Li Song，Haosen Chen，Daining Fang. Quantifying the 2D anisotropic displacement and strain fields in graphite-based electrode via in situ scanning electron microscopy and digital image correlation, Extreme Mechanics Letters, 2020,35,100635. 7) Jian Li, Changyu Zhou，Jianguo Zhu. Limit loads for 180° pipe bends under in-plane bending moment considering geometric nonlinearity, International Journal of Pressure Vessels and Piping, 2020,183,104100 8) 曾宇春，朱奇，杨栋，杨子尧，朱建国.热障涂层弹性模量和残余应力测试研究, 实验力学，2020, 2: 234-242 9) 俞成荣,朱建国, 周晔欣, 张红英，蒋聪盈，谷宇晨，官万兵. 不同集流方式下对称双阴极固体氧化物燃料电池的多场耦合数值模拟及失效分析，力学季刊，2020, 41(3): 419-428。 10) 俞成荣, 朱建国, 蒋聪盈, 谷宇晨, 周晔欣, 李卓斌, 邬荣敏, 仲政, 官万兵. 基于电-化-热耦合理论对称双阴极固体氧化物燃料电池堆的电流与温度场数值模拟，电化学，2020，26(6):789-796（封面论文） 2018年 1) Zhu Q, He W, Jianguo Zhu, Zhou YX, Investigation on interfacial fracture toughness of plasma-sprayed TBCs using a three-point bending method, Surface & Coatings and Technology, 2018, (15):75-83 2) 朱奇，郝文峰，陈雷，朱建国，何广龙. 微尺度散斑制备方法研究及应用进展评价, 实验力学，2018, 33(1):77-84 3) Zhu Q, He W, Chen L, Jianguo Zhu, Hao WF. Interfacial toughness evaluation of thermal barrier coatings by bending test, Theoretical and Applied Mechanics Letters, 2018，8(1):3-6 4) Hao WF*, Liu Y, Huang XR, Liu YH, Jianguo Zhu. A unit-cell model for predicting the elastic constants of 3D four directional cylindrical braided composite shafts. Applied Composite Materials, 2018, 25(3)：619-633 5) XR Huang, Y Liu, WF Hao, YH Liu, Jianguo Zhu. Computational analysis of torsional bulking behavior of 3D 4-directional braided composites shafts. Applied Composite Materials, 2018，25(1):163-176. 6) Wenjie Qian, Qi Zhu, Lei Chen, Jianguo Zhu，Lens Distortion Correction for Micro-scale Digital Image Correlation，Proc. of SPIE Vol. 10827, 1082706，icOPEN 2018，doi: 10.1117/12.2500168 7) Hongguang Liu, Wenjie Qian, Lei Chen, Jianguo Zhu，Strain Analysis of Ionic Polymer-Metal Composite Cantilever Actuator using DIC Method，Proc. of SPIE Vol. 10827, 1082703，icOPEN 2018，doi: 10.1117/12.2326960 2017年 1) Hao WF, Jianguo Zhu, Zhu Q, Chen L, Li LK. Displacement field denoising for high-temperature digital image correlation using principal component analysis. Mechanics of Advanced Materials and Structures, 2017, 24(10): 830-839. 2) Yang GB, He W, Jianguo Zhu, Chen L. Fabrication of micro-scale gratings by nanosecond laser and its applications for deformation measurements. Micromachines, 2017, 8(5):136 2016年 1) Jianguo Zhu, Yan GS, He GL, Chen L, Fabrication and optimization of micro-scale speckle patterns for digital image correlation, Measurement Science & Technology, 2016, 27 015203 2) Wei Q, Jianguo Zhu, Chen W, Anisotropic Mechanical Properties of Plasma-Sprayed Thermal Barrier Coatings at High Temperature Determined by Ultrasonic Method，Journal of Thermal Spray Technology，2016, 25(3):605-612 3) Hao WF，Yuan Y N，Jianguo Zhu，Chen L，Effect of impact damage on the curved beam interlaminar strength of carbon/epoxy laminates，Journal of Adhesion Science and Technology, 2016，30（11）：1189-1200 4) Hao WF，Jianguo Zhu，Zhu Q, and Yuan Y N. Study of matrix crack-tilted fiber bundle interaction using caustics and finite element method, Rev. Sci. Instrum. 2016, 87, 023109 5) Hao WF，Jianguo Zhu，Zhu Q, and Yuan Y N. Photoelastic analysis of matrix crack-tilted fiber bundle interaction. Polymer Testing, 2016,51, 106-108 6) Wu LF, Jianguo Zhu, Xie H M，Zhou MM, Single-lens 3D digital image correlation system based on a bilateral telecentric lens and a bi-prism: Systematic error analysis and correction, Optics and Laser in Engineering，2016, 87:129-138. 7) Yan, GS, Jianguo Zhu, Huang YL, Hao WF, Li YJ, Fabrication of micro-scale gratings for moiré method with a femtosecond laser. Theoretical and Applied Mechanics Letters, 2016, 6(4):171-175. 8) Wu LF, Jianguo Zhu, Xie HM，Zhang Q, An Accurate Method for Shape Retrieval and Displacement Measurement using the Bi-prism-based Single Lens 3D Digital Image Correlation, Experimental Mechanics, 2016, 56:1611-1624. 2015年 1) Jianguo Zhu, Xie HM and Chen W. Simulation of residual stresses and their effects on thermal barrier coating systems using finite element method, SCIENCE CHINA Physics, Mechanics & Astronomy, 2015, 58(3): 034602 2) Jianguo Zhu, Zhang BG. Experimental Measurement of Residual Stress on Thermal Spray Coatings with Moire Interferometry and Hole-drilling Method，Applied Mechanics and Materials，2015，Vol. 782：335-340 3) Wu LF, Jianguo Zhu, Xie HM Investigation of residual stress in 2D plane weave aramid fibre composite plates using moiré interferometry and hole-drilling technique, Strain, 2015, 51(6), 429-443 4) Wu LF, Jianguo Zhu, Xie HM Single-lens 3D digital image correlation system based on a bilateral telecentric lens and a bi-prism: validation and application. Applied Optics, 2015, 54(26): 7842-7850 5) Chen W, Jianguo Zhu, Chai GL, Simulation of the effect of sintering and interface on the failure mechanism of thermal barrier coatings. Materials Science Forum, 2015, Vol.817: 764-777 2014年 1) Jianguo Zhu, Xie HM, Li YJ, et al. Interfacial Residual Stress Analysis of Thermal Spray Coatings by Miniature Ring-Core Cutting Combined with DIC Method. Experimental Mechanics, 2014, 54: 127-136 2) Wu LF, Jianguo Zhu, Xie HM. Numerical and Experimental Investigation of Residual Stress in Thermal Barrier Coatings During APS Process. Journal of Thermal Spray Technology, 2014, 23(4): 653-665 3) Jianguo Zhu, Ma K. Microstructural and mechanical properties of thermal barrier coating at 1400oC treatment. Theor. Appl. Mech. Lett., 2014, 4: 7-021008(EI收录) 4) Zhu RH, Xie HM, Jianguo Zhu, Li YJ, Che ZG, Zou SK. A micro-scale strain rosette for residual stress measurement by SEM Moiré method. Science China Physics, Mechanics and Astronomy, 2014, 57: 716-722 5) Ma K, Xie HM and Jianguo Zhu, Two modified coherent gradient sensing methods for slope measurement of reflective surfaces. Meas. Sci. Technol. 2014, 25 125202 6) Wu Lifu, Jianguo Zhu and Xie Huimin, A modified virtual point model of the 3D DIC technique using a single camera and a bi-prism. Meas. Sci. Technol. 2014, 25 115008 7) Zhu Ronghua, Xie Huimin, Dai Xianglu, Jianguo Zhu and Jin Aizi, Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system. Meas. Sci. Technol. 2014, 25 095003 2013年 1) Wang HX, Xie HM, Dai XL, Jianguo Zhu. Fabrication of a DIC sensor for in-plane deformation measurement. Measurement Science & Technology, 2013, 24: 065402 2) Tang M J, Xie H M, Jianguo Zhu, Wu D. The failure mechanisms of TBC structure by moire interferometry. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2013, 565: 142-147 3) Ma K, Jianguo Zhu, Xie H M, Wang H X. Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: Experiment and numerical analysis. Surface and Coatings Technology, 2013, 235: 589-595 4) Huang Y, Bu Y G, Zhou LD, Jianguo Zhu, Shi HJ, Xie HM, Feng X. Fatigue crack growth and propagation along the adhesive interface between fiber-reinforced composites. Eng Fract Mech, 2013, 110: 290-299 5) 朱建国，谢惠民，刘战伟, 热障涂层力学性能的实验测试方法研究进展. 力学学报，2013, 45（1）：45-60 6）朱建国, 李艳杰, 王庆华, 谢惠民. 基于FIB的微观变形载体制作技术研究及应用. 实验力学, 2013, 28(2): 151-157 |
