论文
[1] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*, Xiao-Yu Wang. Creep analyses for pipe bends under combined internal pressure and bending loads. International Journal of Pressure Vessels and Piping 2021; 193: 104450. [2] Wen-Jie Qian, Hui-Ying Zhang, Jian-Guo Zhu*, Jian Li*, Jian Zhang, Mu-Yu Zhang. Determination of fracture toughness of polymer coating using micro-scale digital image correlation technique. Polymer Testing 2021; 93: 106896. [3] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*. Limit loads for 180° pipe bends under in-plane bending moment considering geometric nonlinearity. International Journal of Pressure Vessels and Piping 2020; 183: 104100. [4] Wen-Jie Qian, Jian Li, Jian-Guo Zhu*, Wen-Feng Hao*, Lei Chen. Distortion correction of a microscopy lens system for deformation measurements based on speckle pattern and grating, Optics and Laser in Engineering 2020; 124: 105804. [5] Jian Li, Chuan-Yi Su, Lei Lu, Peng Zhang, Le Chang, Xin-Ting Miao, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Investigation on fatigue crack growth behavior for commercial pure titanium at different crack tip plastic deformed levels. Theoretical and Applied Fracture Mechanics 2019; 100: 1-13. [6] Jian Li, Peng Zhang, Lei Lu, Fei Lv, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Effect of pre-strain on fatigue crack growth behavior for commercial pure titanium at ambient temperature. International Journal of Fatigue 2018; 117: 27-38. [7] Jian Li, Lei Lu, Peng Zhang, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Yuan-Zhe Wang, Xiao-Hua He, Chang-Yu Zhou*. Effect of cold creep on fatigue crack growth behavior for commercial pure titanium. Theoretical and Applied Fracture Mechanics 2018; 97: 177-188. [8] Jian Li, Chang-Yu Zhou*, Le Chang, Xin-Ting Miao, Xiao-Hua He. Limit loads for un-cracked and circumferential through-wall cracked pipe bends under torsion moment considering geometric nonlinearity. Thin-Walled Structures 2017; 116: 37-52. [9] Jian Li, Chang-Yu Zhou*, Xin-Ting Miao, Le Chang, Xiao-Hua He. Plastic limit loads for pipe bends with circumferential through-wall crack under torsion moment. International Journal of Mechanical Sciences 2015; 100: 283-297. [10] Jian Li, Chang-Yu Zhou*, Peng Cui, Xiao-Hua He. Plastic limit loads for pipe bends under combined bending and torsion moment. International Journal of Mechanical Sciences 2015; 92: 133-145. [11] Jian Li, Chang-Yu Zhou*, Ji-Lin Xue, Xiao-Hua He. Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis. International Journal of Mechanical Sciences 2014; 88: 100-109. [12] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. Comparisons of low cycle fatigue behavior of CP-Ti under stress and strain-controlled modes in transverse direction. Materials Science and Engineering A 2019, 746: 27-40. [13] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction. Materials Science and Engineering A 2019, 742: 211-223. [14] Le Chang, Chang-Yu Zhou*, Hong-Xi Liu, Jian Li, Xiao-Hua He. Orientation and strain rate dependent tensile behavior of single crystal titanium nanowires by molecular dynamics simulation. Journal of Materials Science & Technology 2018; 34(5): 864-877. [15] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of I-II mixed mode crack for commercially pure Titanium. Theoretical and Applied Fracture Mechanics 2018; 96: 202-215. [16] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading. European Journal of Mechanics/A Solids 2018; 72: 235-244. [17] Shun-Jie Li, Chang-Yu Zhou*, Jian Li, Xiang-Ming Pan, Xiao-Hua He. Effect of bend angle on plastic limit loads of pipe bends under different load conditions. International Journal of Mechanical Sciences 2017; 131-132: 572-585.
|