李文龙-土木工程与力学学院

姓名

李文龙

出生年月

1984.06

政治面貌

党员

最高学位

博士

职称

资格副教授

任职年月

2021.09

职务

任职年月

所在学科

力学

博导/硕导

学习与工作经历

学习经历：
2011.08-2018.12 内布拉斯加大学林肯固体力学博士
2007.09-2010.06 东北农业大学机械设计及理论工学硕士
2003.09-2007.06 中北大学机械制造及自动化学士
工作经历：
2021.09-至今江苏大学资格副教授
2019.01-2021.06 内布拉斯加大学林肯博后研究助理

学术与社会任职

研究领域

时间依存材料的本构关系及损伤研究
植物力学

主要论著

论文
力学与工程： Sealy, M. *, Hadidi, H., Sotelo, L., Li, W., Turner, J., McGeough, J.: Compressive behavior of 420 stainless steel after asynchronous laser processing. CIRP Annals Manufacturing Technology, (2020)
Qian, W. *, Li, W., Nguyen, C., Johnson, T., Turner, J. *: Quantitative nanoscale measurements of the thermomechanical properties of poly-ether-ether-ketone (PEEK). Journal of Polymer Science, 58, 1544-1552 (2020). (Front cover)
Li, W., Delpouve, N., Araujo, S., Batteux, F., Bobo, E., Saiter, J., Tan, L., Negahban, M. *: Controlling properties of acrylate/epoxy interpenetrating polymer networks by premature termination of radical polymerization of acrylate. Polymer Engineering & Science, 59, 1729-1738 (2019)
Li, W., Gazonas, G., Brown, E.N., Rae, P.J., Negahban, M. *: Thermomechanical model for monotonic and cyclic loading of PEEK. Mechanics of Materials, 129, 113-138 (2019)
Chen, Z., Li, W., Negahban, M. *, Saiter, J., Delpouve, N., Tan, L., Li, Z.: Approaching the upper bound of load capacity: Functional grading with interpenetrating polymer networks. Materials & Design, 137, 152-163 (2018)
Li, W., Bakhtiary Noodeh, M., Delpouve, N., Saiter, J. M., Tan, L., & Negahban, M. *: Printing continuously graded interpenetrating polymer networks of acrylate/epoxy by manipulating cationic network formation during stereolithography. Express Polymer Letters, 10(12), 1003-1015 (2016)
植物力学： Belteton, S.A., Li, W., Yanagisawa, M., Afsha, F., Quinn, M.I., Szymanski, M.K., Marley, M.W., Turner, J.A., Szymanski, D.B. *: Real-time conversion of tissue-scale mechanical forces into an interdigitated growth pattern. Nature Plants. 7, 826–841 (2021).
Li, W., Keynia, S., Afsha, F., Belteton, S.A., Szymanski, D.B., Turner, J.A.*: Protocol for mapping the spatial variability in cell wall mechanical bending behavior in living leaf pavement cells. Plant Physiology. 2021, (Under revision), Preprint at https://biorxiv.org/cgi/content/short/2021.02.23.432478v1
Chen, Y., Li, W., Turner, J.A., Anderson, C.A. *: PECTATE LYASE LIKE12 PECTATE LYASE LIKE12 patterns the guard cell wall to coordinate turgor pressure and wall mechanics for stomatal function in Arabidopsis thaliana. The Plant Cell. (2021)
专著
Li, W., Gazonas, G., Brown, E.N., Rae, P.J., Negahban, M. *: Characterization and Modeling of PEEK in Histories with Reverse Loading, in Challenges in Mechanics of Time Dependent Materials, Volume 2. Springer, Cham. p. 65-69. (2018) (Book chapter)
Li, W., Gazonas, G., Brown, E.N., Rae, P.J., Negahban, M. *: Back Stress in Modeling the Response of PEEK and PC. In Challenges in Mechanics of Time Dependent Materials, Volume 2, B. Antoun et al. Editors. Springer International Publishing, p. 181–186 (2017) (Book chapter)
Li, W., Brown, E.N., Rae, P.J., Gazonas, G., Negahban, M. *: Mechanical Characterization and Preliminary modeling of PEEK. Mechanics of Composite and Multi-functional Materials, Volume 7, C. Ralph, et al., Editors. Springer International Publishing. p. 209-218 (2016) (Book chapter)
其他
Araujo, S., Batteux, F., Li, W., Butterfield, L., Delpouve, N. *, Esposito, A., Tan, L., Saiter, J.-M., Negahban, M.: A structural interpretation of the two components governing the kinetic fragility from the example of interpenetrated polymer networks. J. Polym. Sci. B Polym. Phys. 56, 1393-1403 (2018)
Liu, Y., Yi, J., Li, Z. *, Su, X., Li, W., Negahban, M.: Dissipative elastic metamaterial with a low-frequency passband. AIP Advances, 7(6): p. 065215 (2017)
Zhang, Z., Zhang, L., John, J., Li, W., George, G., Negahban, M. *: High fidelity computational characterization of the mechanical response of thermally aged polycarbonate. Modelling and Simulation in Materials Science and Engineering, 25(5): p. 055012 (2017)
Kuss, M.A., Wu, S., Wang, Y., Untrauer, JB., Li, W., Lim, JY., Duan, B. *: Prevascularization of 3D printed bone scaffolds by bioactive hydrogels and cell co-culture. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, (2017)
Butterfield, L., Bobo, E., Li, W., Henning, S., Delpouve, N., Tan, L., Saiter, J.-M., Negahban, M. *: Morphology and thermomechanical properties in epoxy acrylate interpenetrated networks. Macromolecular Symposia. 365(1): p. 59-66 (2016)
Zhao, S., Li, W., Gu, L. *: Biomechanical prediction of abdominal aortic aneurysm rupture risk: Sensitivity analysis. J. Biomedical Sci. & Eng., 5: 664-671 (2012)

重要学术活动

联系方式

镇江市学府路301号84信箱
江苏大学土木工程与力学学院 212013